Igmp Commands - Alcatel-Lucent 7750 SR OS Service Manual

VPLS Service Configuration Commands

IGMP Commands

igmp
group
Syntax group [grp-ip-address]
Context show>router>igmp
Description
This command displays the multicast group and (s, g) addresses. If no grp-ip-address parameters are
specified then all IGMP group, (*, g) and (s, g) addresses are displayed.
Parameters
grp-ip-address — Displays specific multicast group addresses.
Output IGMP Group Output — The following table describes the output fields for IGMP group
information.
Sample Output
A:NYC# show router igmp group
===============================================================================
IGMP Groups
===============================================================================
(*,224.24.24.24)
(*,239.255.255.250)
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 2
===============================================================================
A:NYC#
A:NYC# show router igmp group 224.24.24.24
===============================================================================
IGMP Groups
===============================================================================
(*,224.24.24.24)
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 1
===============================================================================
A:NYC#
Page 636
Label
IGMP Groups
Fwd List
Blk List
Fwd List : nyc-vlc
Fwd List : nyc-vlc
Fwd List : nyc-vlc
Displays the IP multicast sources corresponding to the IP multicast
groups which are statically configured.
Displays the list of interfaces in the forward list.
Displays the list of interfaces in the block list.
Up Time : 0d 05:21:38
Up Time : 0d 05:21:38
Up Time : 0d 05:23:23
7750 SR OS Services Guide
Description