Alcatel-Lucent 7750 SR OS Service Manual page 1291

-ccag-id — Specifies which ccag-id on which the SAP must be created. The specified ccag-id must
.a | .b — The .a and .b portion of the CCAG SAP identifier is required and is used to define the CCA
.sap-net — Specifies that the SAP is of the SAP-2-Net pairing type and is required when the cc-id is
.sap-sap — The .sap-sap portion of the CCAG SAP identifier is mutually exclusive to .sap-net and is
:cc-id — The :cc-id portion of the CCAG SAP identifier is required and specifies the unique cc-id in
create — Explicitly indicates that the specified CCAG SAP is being created by the sap command.
7750 SR OS Services Guide
exist on the system or the SAP creation will fail. The leading dash must be included as a
separator between ccag and the ccag-id.
Values
-1 (dash 1) to -8 (dash 8)
Default
None
bandwidth path with will be associated with the SAP. The path association must be specified and
.a and .b are mutually exclusive. The .a designation identifies the SAP as being on the alpha path
and the .b designation identifies the SAP as being on the beta path. The paired SAP or network IP
interface using the same cc-id as the SAP must be associated with the opposite path. The leading
period must be included as a separator between the ccag-id and the path designator.
Values
.a or .b
Default
None
paired with a network IP interface. The pairing type .sap-net is mutually exclusive with pairing
type .sap-sap. If .sap-net is not specified, .sap-sap is assumed and does not need to be included in
the SAP identification. When specified, the leading period must be used as a separator between
the path designator and the pairing type.
Values
.sap-net or .sap-sap
Default
.sap-sap
used to define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the
cross connect object sharing the same cc-id on the opposite path is a CCAG SAP. If the other
cross connect object is a network IP interface, the pairing type must be defined as .sap-net. If
.sap-net is not specified, .sap-sap is assumed and does not need to be included in the SAP
identification. When specified, the leading period must be used as a separator between the path
designator and the pairing type.
Values
.sap-net or .sap-sap
Default
.sap-sap
use by the CCAG SAP and the cross connect object on the other path.
Values
1 to 4094
Default
None
Handling the inclusion or exclusion state of the create keyword is dependent on the system
environment variable create.
When the system environment variable create is enabled, the system requires the explicit use of
the create keyword when creating objects such as SAPs. If the keyword is not included and the
specified CCAG SAP has not already been created, an error will occur and the CLI will not
change context to the specified CCAG SAP instance. This is designed to prevent the inadvertent
creation of a CCAG SAP in the event where the wrong CCAG SAP identifier is specified during
an attempt to edit an existing CCAG SAP. If the create keyword is specified, the CCAG SAP will
Versatile Service Module
Page 1293