Alcatel-Lucent 7750 SR OS Service Manual page 1060

VPRN Service Configuration Commands
Description
Use this command to define the length of time neighboring router consider this router to be up.
Use the no form of this command to revert to the default value.
Default
150
Parameters
holdtime — Specify the length of time, in seconds, that neighbor should consider the sending router to
be operational.
priority
Syntax priority priority
no priority priority
Context config>router>pim>rp>local
config>service>vprn>pim>rp>rp-candidate
Description
This command defines the priority used to become the rendezvous point (RP). The higher the priority
value, the more likely that this router will become the RP.
Use the no form of this command to revert to the default value.
Default
1
Parameters
priority — Specify the priority to become the designated router. The higher the value the more likely
the router will become the RP.
static
Syntax static
Context config>service>vprn>pim>rp
Description
This command enables access to the context to configure a static rendezvous point (RP) of a PIM-SM
protocol instance.
Default
none
address
Syntax [no] address ip-address
Context config>service>vprn>pim>rp>static
Description
This command configures the static rendezvous point (RP) address.
The no form of this command removes the static RP entry from the configuration.
Default
none
Page 1060
Values
0 — 255
Values
0 — 255
7750 SR OS Services Guide