Alcatel-Lucent 7750 SR OS Service Manual page 1395

count requests — Specifies the number of times to perform an OAM ping probe operation. Each
do-not-fragment — Sets the DF (Do Not Fragment) bit in the ICMP ping packet.
timeout seconds — Overrides the default timeout value and is the amount of time that the router
traceroute
Syntax traceroute [ip-address | dns-name] [ttl ttl] [wait milli-seconds] [no-dns] [source ip-address]
[tos type-of-service] [router router-instance]
Context <GLOBAL>
Description
The TCP/IP traceroute utility determines the route to a destination address. DNS lookups of the
responding hosts is enabled by default.
*A:ALA-1# traceroute 192.168.xx.xx4
traceroute to 192.168.xx.xx4, 30 hops max, 40 byte packets
*A:ALA-1#
Parameters
ip-address — The far-end IP address to which to send the traceroute request message in dotted
dns-name — The DNS name of the far-end device to which to send the traceroute request message,
ttl ttl — The maximum Time-To-Live (TTL) value to include in the traceroute request, expressed as a
7750 SR OS Services Guide
OAM echo message request must either timeout or receive a reply before the next message
request is sent.
Values
1 — 100000
Default
5
will wait for a message reply after sending the message request. Upon the expiration of message
timeout, the requesting router assumes that the message response will not be received. A 'request
timeout' message is displayed by the CLI for each message request sent that expires. Any
response received after the request times out will be silently discarded.
Default
5
Values
1 — 10
1 192.168.xx.xx4 0.000 ms
decimal notation.
Values
ipv4-address :
ipv6-address:
expressed as a character string.
decimal integer.
Values
1 — 255
OAM and SAA Command Reference
x: [0 — FFFF]H
d: [0 — 255]D
0.000 ms 0.000 ms
a.b.c.d
x:x:x:x:x:x:x:x
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
Page 1397