Alcatel-Lucent 7750 SR OS Service Manual page 574

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

VPLS Service Configuration Commands
Page 574
Label
Admin State
Oper State
Ingress Label
Egress Label
Ingress Filter
Egress Filter
Far End
Last Changed
Signaling
Admin State
Oper State
Hello Time
Hello Msg Len
Max Drop Count
Hold Down Time
SDP Delivery Mech-
anism
Number of SDPs
Service Access Points
Service Id
Port Id
Description
Encap Value
Description (Continued)
The administrative state of this SDP.
The operational state of this SDP.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by this SDP.
The ID of the ingress filter policy.
The ID of the egress filter policy.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
The date and time of the most recent change to this customer.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
Specifies the operating status of the keepalive protocol.
The current status of the keepalive protocol.
Specifies how often the SDP Echo Request messages are transmitted
on this SDP.
Specifies the length of the SDP Echo Request messages transmitted on
this SDP.
Specifies the maximum number of consecutive SDP Echo Request
messages that can be unacknowledged before the keepalive protocol
reports a fault.
Specifies the amount of time to wait before the keepalive operating
status is eligible to enter the alive state.
When the SDP type is MPLS, a list of LSPs used to reach the far-end
router displays. All the LSPs in the list must terminate at the IP address
specified in the Far End field.
If the SDP type is GRE, then the following message displays:
SDP Delivery Mechanism is not MPLS
The total number SDPs applied to this service ID.
The service identifier.
The ID of the access port where this SAP is defined.
Generic information about the SAP.
The value of the label used to identify this SAP on the access port.
7750 SR OS Services Guide

Advertisement

Table of Contents
loading

Table of Contents