Alcatel-Lucent 7750 SR OS Service Manual page 753

IES Interface IPv6 Commands
ipv6
Syntax [no] ipv6
Context config>service>ies>interface
Description
This command enables the context to configure IPv6 for an IES interface.
address
Syntax address ipv6-address/prefix-length [eui-64]
no address ipv6-address/prefix-length
Context config>service>ies>if>ipv6
Description
This command assigns an IPv6 address to the IES interface.
Parameters
ipv6-address/prefix-length — Specify the IPv6 address on the interface.
eui-64 — When the eui-64 keyword is specified, a complete IPv6 address from the supplied prefix
dhcp6-relay
Syntax [no] dhcp6-relay
Context config>service>ies>if>ipv6
Description
This command enables the context to configure DHCPv6 relay parameters for the IES interface.
The no form of the command disables DHCP6 relay.
7750 SR OS Services Guide
Values
ipv6-address/prefix: ipv6-address
prefix-length
and 64-bit interface identifier is formed. The 64-bit interface identifier is derived from MAC
address on Ethernet interfaces. For interfaces without a MAC address, for example ATM
interfaces, the Base MAC address of the chassis is used.
Internet Enhanced Services
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
1 — 128
Page 753