Alcatel-Lucent 7750 SR OS Service Manual page 884

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Configuring a VPRN Service with CLI
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
local-proxy-arp
mac
proxy-arp-policy
remote-proxy-arp
tos-marking-state
Configure IES group interface SRRP parameters
config>service>ies>sub-if>grp-if>srrp
gw-mac
keep-alive-interval
message-path
policy
priority
no shutdown
Configure VPRN service PIM parameters
config>service>vprn>pim
apply-to
import
mdt
data
data-delay-interval
data-threshold
default
join-tlv-packing-
disable
non-dr-attract-traffic
hello-interval
Page 884
Enables local proxy ARP on the interface.
Assigns a specific MAC address to a VPRN interface.
Configures a proxy ARP policy for the interface.
Enables remote proxy ARP on the interface.
Changes the default trusted state to a non-trusted state.
Overrides the default SRRP gateway MAC address used by the SRRP
instance.
defines the interval between SRRP advertisement messages sent when
operating in the master state.
defines a specific SAP for SRRP in-band messaging.
associates one or more VRRP policies with the SRRP instance.
overrides the default base priority for the SRRP instance.
Administratively enables the entity.
Creates a PIM interface with default parameters.
Specifies the import route policy to be used for determining which
routes are accepted from peers.
Enables the context for a multicast distribution tree (MDT) to carry
multicast traffic from customer sites associated with the multicast
domain.
Configures a pool of addresses that can be used to generate data only
MDT tunnels.
Configures the data delay interval in seconds.
Configures threshold for a group prefix.
Configures a default multicast distribution tree (MDT) group address
used by the core instance of PIM to identify multicast traffic for this
VPRN instance.
Enables the packing of multiple MDT join TLVs.
Specifies whether the router should ignore the designated router state
and attract traffic even when it is not the designater router.
Configures the frequency at which PIM Hello messages are transmitted
on this interface.
Description
7750 SR OS Services Guide
Page
981
982
982
983
985
1035
1036
1036
1038
1038
951
906
1048
1048
1053
1054
1054
1054
1055
1055
1055
1050

Advertisement

Table of Contents
loading

Table of Contents