Alcatel-Lucent 7750 SR OS Service Manual page 1440

OAM and SAA Command Reference
timeout timeout — The timeout parameter in seconds, expressed as a decimal integer. This value is
sdp-ping
Syntax sdp-ping orig-sdp-id [resp-sdp resp-sdp-id
seconds
Context <GLOBAL>
config>saa>test>type
Description
Tests SDPs for uni-directional or round trip connectivity and performs SDP MTU Path tests.
The sdp-ping command accepts an originating SDP-ID and an optional responding SDP-ID. The
size, number of requests sent, message time-out and message send interval can be specified. All sdp-
ping requests and replies are sent with PLP OAM-Label encapsulation, as a service-id is not
specified.
For round trip connectivity testing, the resp-sdp keyword must be specified. If resp-sdp is not
specified, a uni-directional SDP test is performed.
To terminate an sdp-ping in progress, use the CLI break sequence <Ctrl-C>.
An sdp-ping response message indicates the result of the sdp-ping message request. When multiple
response messages apply to a single SDP Echo Request/Reply sequence, the response message with
the highest precedence will be displayed. The following table displays the response messages sorted
by precedence.
Page 1442
If the interval is set to 1 second, and the timeout value is set to 10 seconds, then the maximum
time between message requests is 10 seconds and the minimum is 1 second. This depends upon
the receipt of a message reply corresponding to the outstanding message request.
Default
1
Values
1 — 10
used to override the default timeout value and is the amount of time that the router will wait for
a message reply after sending the message request. Upon the expiration of message timeout, the
requesting router assumes that the message response will not be received. Any response received
after the request times out will be silently discarded.
Default
5
Values
1 — 10
[interval seconds
]
Result of Request
Request timeout without reply
Request not sent due to non-exis-
tent orig-sdp-id
Request not sent due to administra-
tively down orig-sdp-id
Request not sent due to operation-
ally down orig-sdp-id
[fc fc-name [profile {in | out}
]
[size octets [count send-count
] ]
Displayed Response Message
Request Timeout
Orig-SDP Non-Existent
Orig-SDP Admin-Down
Orig-SDP Oper-Down
7750 SR OS Services Guide
[timeout
]]
]
Precedence
1
2
3
4