Alcatel-Lucent 7750 SR OS Service Manual page 1189

Sample Output
*A:ALA-12#
==============================================================================
RIP Neighbors
==============================================================================
Interface
------------------------------------------------------------------------------
router-2/1
router-2/2
router-2/3
router-2/4
router-2/5
router-2/6
router-2/7
==============================================================================
*A:ALA-12#
Detailed Show RIP Neighbor Output — The following table describes the standard command
output fields for a RIP group.
7750 SR OS Services Guide
Label
Adm
Opr
Primary IP
Send Mode
Recv Mode
Metric In
show router 3 rip neighbor
Virtual Private Routed Network Services
Down — The RIP neighbor interface is administratively down.
Up — The RIP neighbor interface is administratively up.
Down — The RIP neighbor interface is operationally down.
Up — The RIP neighbor interface is operationally up.
The Primary IP address of the RIP neighbor interface.
Bcast — Specifies that RIPv2 formatted messages are sent to the
broadcast address.
Mcast — Specifies that RIPv2 formatted messages are sent to the
multicast address.
None — Specifies that no RIP messages are sent (i.e., silent
listener).
RIPv1 — Specifies that RIPv1 formatted messages are sent to the
broadcast address.
Both — Specifies that RIP updates in either version 1 or version 2
format will be accepted.
None — Specifies that RIP updates will not be accepted.
RIPv1 — Specifies that RIP updates in version 1 format only will
be accepted.
RIPv2 — Specifies that RIP updates in version 2 format only will
be accepted.
The metric added to routes received from a RIP neighbor.
Adm Opr Primary IP
Up Up 10.0.3.12
Up Up 10.0.5.12
Up Up 10.0.6.12
Up Up 10.0.10.12
Up Up 10.0.9.12
Up Up 10.0.17.12
Up Up 10.0.16.12
Description
Send Recv
Mode Mode
None Both
BCast Both
BCast Both
BCast Both
BCast Both
None Both
None Both
Page 1189
Metric
In
1
1
1
1
1
1
1