Adjust Image Transfer; Adjusting The Transfer Output Value - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Appendix

Adjust Image Transfer

This section describes how to adjust the transfer output value.
You can specify the transfer output value manually or by scanning the sample printout.
This is useful when the toner image does not transfer to the paper properly.

Adjusting the Transfer Output Value

You can specify the image transfer output value for each paper type.
Adjusting the transfer output value manually
1
Press the <Log In/Out> button and enter the System Administration mode.
2
Select [Tools] on the Services Home screen.
3
Select [System Settings] > [Common Service Settings] > [Maintenance].
4
Select [Adjust Image Transfer].
5
Select [Paper Type].
6
Select the paper type, and then select [Close].
16
7
Select [Print Sample].
654
Reference
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.138).