9 Web Applications
Enter the User ID to access the remote service, with up to 128 characters as
necessary.
Important • Depending on the settings on the remote service, the entry for [User ID] may be invalid.
Note
Password
Enter the password for the User ID, with up to 128 characters as necessary.
Machine/Authentication Notification
Set whether to notify the remote server of machine information and user authentication
information every time the machine is connected to the remote service.
Note
Reset Account
Deletes all settings registered.
Configuring/Canceling the Auto Jump Destination
To configure or cancel the auto jump destination (default access server), follow the
procedure below.
1
Select the access destination you
want to set as the auto jump
destination.
2
Select [Enter].
To cancel the settings, select
[Clear].
9
80
Check the settings on the remote service.
• Along with [User ID], set also [Password]. [User ID] will be invalid unless [Password] is set.
• The remote service determines whether to use the information. No need to configure
settings on the control panel.