Auto/Color/Black & White (Selecting The Color For Copying); Lighten/Darken (Adjusting The Copy Density) - Fuji Xerox ApeosPort-VI C7771 User Manualline

1 2 Sided
Makes a copy of a 1-sided document on both sides of the paper.
2 2 Sided
Makes a copy of a 2-sided document on both sides of the paper.
Auto/Color/Black & White (Selecting the Color for Copying)
This feature allows you to select a color mode.
1
Select [Auto], [Color] or [Black & White].
Auto
The machine automatically determines the colors of the original document and makes
copies in full color if the original document is colored, and in single color (black) if the
document is black-and-white.
Note
If a color document is in one of the following conditions, the machine may copy the document in black and
white.
The colored area is too small.
The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color. For more
information, refer to "Tools" > "Common Service Settings" > "Image Quality Adjustment" > "Image Quality"
> "Output Color Recognition" in the Administrator Guide.
Color
Copies in full color.
Black & White
Copies in black and white regardless of the colors in the original document.
Note
If the use of certain colors is not allowed, the available colors will be restricted. For more information, refer to
"Tools" > "Accounting" > "Create/View User Accounts" > "Service Access" in the Administrator Guide.

Lighten/Darken (Adjusting the Copy Density)

This feature allows you to select a copy-density level from seven levels.
Simple Copy
3
93