Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1909

AAA Commands
output definitions (continued)
Read/Write for domains
Read Only for families
Read/Write for families
END user profile
Snmp allowed
Snmp authentication
Snmp encryption
Possible values for command domains and families are listed here:
Domain
domain-admin
domain-system
domain-physical
domain-network
domain-layer2
domain-service
domain-security
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
The command domains available with the user's read-write access. See
the table on the next page for a listing of valid domains. This field does
not display if an end-user profile is associated with the user account.
The command families available with the user's read-only access. See
the table on the next page for a listing of valid families. This field does
not display if an end-user profile is associated with the user account.
The command families available with the user's read-write access. See
the table on the next page for a listing of valid families. This field does
not display if an end-user profile is associated with the user account.
The name of an end-user profile associated with the user account. Con-
figured through the end-user profile
plays if an end-user profile is associated with the user account.
Indicates whether or not the user is authorized to use SNMP (YES or
NO). SNMP is allowed for the user account when SNMP authentica-
tion is specified for the account.
The level of SNMP authentication, if any, configured for the user. This
field only displays if the user is authorized to use SNMP.
The level of SNMP encryption, if any, configured for the user. This
field only displays if the user is authorized to use SNMP.
Corresponding Families
file telnet dshell debug
system aip snmp rmon webmgt config
chassis module interface pmm health
ip rip ip-routing ipmr ipms
vlan bridge stp 802.1q linkagg ip-helper
dns
session aaa
November 2009
command. This field only dis-
page 43-69