Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1908

User name = public,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Snmp allowed
User name = default (*),
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Read/Write for families = file telnet dshell debug ip rip ip-routing ipmr ipms ,
Snmp allowed
(*)Note:
The default user is not an active user account.
It contains the default user account settings,
for new user accounts.
-> show user j_smith
User name = j_smith,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
END user profile
Snmp allowed
Snmp authentication
Snmp encryption
output definitions
User name
Password expiration
Password allow to be modified
date
Account lockout
Password bad attempts
Read Only for domains
page 43-68
= 10/27/2007 11:01 (30 days from now),
= None,
= 0,
= None,
= All ,
= NO,
= 10/27/2007 11:01 (30 days from now),
= None,
= 0,
= None,
= System Physical Layer2 Services policy Security ,
= NO,
= 10/27/2007 11:01 (30 days from now),
= Yes (Automatically unlocked after 19 minute(s)from now),
= 3,
= u_profile1,
= YES,
= SHA,
= DES
The user name for this account.
The date and time on which the password will expire. This field only
displays if the password expiration is configured specifically for a user,
or a default password expiration is configured globally on the switch
through the user password-expiration
time are based on the switch's default system date/time or the system
date/time configured through the
mands.)
The earliest date and time on which the user may change the password.
Configured through the
Indicates if the user account is locked out (Yes or No) and how many
minutes remain until the user account is automatically unlocked. If no
remaining time is displayed, the admin user or a user with admin privi-
leges must manually unlock the account. Configured through the
lockout-duration
The number of failed password login attempts for this user account.
The command domains available with the user's read-only access. See
the table on the next page for a listing of valid domains. This field does
not display if an end-user profile is associated with the user account.
= 9/30/2007 10:59 (3 days from now),
= 9/30/2007 10:59 (3 days from now),
= 9/30/2007 10:59 (3 days from now),
command. (Note that the date/
system date
user password-min-age
and user lockout unlock
OmniSwitch 6250 CLI Reference Guide
AAA Commands
and system time com-
command.
user
commands.
November 2009