802.1X Initialize - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

802.1X Commands

802.1x initialize

Re-initializes a particular 802.1X port. Stops traffic on the port; then requires re-authentication of the port.
802.1x initialize slot/port
Syntax Definitions
slot/port
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
This command is typically only used for troubleshooting, to reset the port access control mechanism in
the switch.
•
When this command is entered, all traffic on the port is stopped; the port is then re-authenticated.
Connectivity is restored with successful re-authentication.
Examples
-> 802.1x initialize 3/1
Release History
Release 6.6.1; command was introduced.
Related Commands
802.1x
MIB Objects
dot1xPaePortTable
dot1xPaePortInitialize
OmniSwitch 6250 CLI Reference Guide
The slot and port number of the 802.1x port.
Configures 802.1X parameters on a particular slot/port.
November 2009 page 44-5