This chapter includes descriptions for Switch Logging commands. These commands are used to configure
parameters for the Switch Logging utility.
MIB information for the system commands is as follows:
Filename:
AlcatelIND1System.MIB
Module:
ALCATEL-IND1-SYSTEM-MIB
A summary of the available commands is listed here.
swlog
swlog appid level
swlog output
swlog output flash file-size
swlog clear
show log swlog
show swlog
OmniSwitch 6250 CLI Reference Guide
45 Switch Logging
November 2009
Commands
page 45-1