Upgrade Process; Generating An Encryption Key - Allied Telesis AR Router Configuration

Helpful Scripts

1.4. Upgrade Process

Upgrade process
Make space, delete the old files
Load files
Apply a Help file
Save the config
Enable the release licence
Set the current release and patch file
Warm boot the router

1.5. Generating an Encryption Key

Task
Add security level user
Keep security officer access for 10 Minutes
Turn on Security
Create the Manual or SA key at one end
Or
Create the ISAKMP key
View the key and
Enter the Manual/SA key at the other end
Or
Enter the ISAKMP key at the other end
Allow remote Security officer access and
Specify remote IP address ranges
Helpful Scripts
Revision 5.8.7; 5 April 2001
Commands
Del fi=<oldfile.ext>
Load fi=<file.rez> dest=flash serv=<server ip>
Load fi=<file.paz> dest=flash serv=<server ip>
Load fi=<file.hlp> dest=flash serv=<server ip>
Set help=<help>.hlp
Create conf=<current config>
Enable rel=<release.rez> num=<release> pass=<password>
Set inst=pref rel=<release.rez> pat=<patch.paz>
Restart reboot
Command
Add user=secoff pass=secoff priv=security
Set user securedelay=600
Enable system security
At router 'A'>Create enco key=1 type=des random
Or
At router 'A'>Create enco key=1 type=gen random
At router 'A'>Sho enco key=1
(tip: copy and paste this key to router B)
At router 'B'>Create enco key=1 type=des val=<router 'A' key>
Or
At router 'B'>Create enco key=1 type=gen val=<router 'A' key>
Enable user rso
Add user rso ip=<remote access ip> mask=<mask>
Page
6