Show Crypto Key Mypubkey - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide
Example
The following example displays the SSH server configuration.
Console# show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA (DSS) key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP address SSH username
---------- ------------
172.16.0.1 John Brown
The following table describes significant fields shown above:
Field
IP address
SSH username
Version
Cipher
Auth Code

show crypto key mypubkey

The show crypto key mypubkey Privileged EXEC mode command displays the SSH public keys on the device.
Syntax
show crypto key mypubkey [rsa | dsa]
Parameters
•
rsa — Indicates the RSA key.
•
dsa — Indicates the DSA key.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Version
---------
2.0 3
D escr ip tio n
Client address
User name
SSH version number
Encryption type (3DES, Blowfish, RC4)
Authentication Code (HMAC-MD5, HMAC-SHA1)
Cipher Auth Code
------- ----------
DES HMAC-SHA1
Page 216