Authentication - Fuji Xerox Versant 80 Press User Manual

13 Tools
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using the keyboard displayed, and then select [Save].
Note
4
Select [Retype Passcode], enter the same passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.

Authentication

In [Authentication], you can set the following items.
Login Type
Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note
Login to Remote Accounts
13
Authenticates users based on the user information registered on a remote authentication
server.
Note
Access Control
Allows you to restrict access to the machine or each service. Once the access control is
enabled, user authentication is required to use the machine or the services.
Important • When a user is authenticated by a remote authentication server (except ApeosWare Authentication
544
• If no passcode is set, leave the text boxes blank and select [Save].
Login Type ..................................................................................................................................................................................... 544
Access Control............................................................................................................................................................................... 544
Create/View User Accounts....................................................................................................................................................... 546
Reset User Accounts.................................................................................................................................................................... 546
Create Authorization Groups .................................................................................................................................................... 546
User Details Setup ....................................................................................................................................................................... 547
Maximum Login Attempts by System Administrator.......................................................................................................... 549
Passcode Policy............................................................................................................................................................................. 549
Charge/Private Print Settings ................................................................................................................................................... 549
Receive Control............................................................................................................................................................................. 550
• When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.
• When [Login to Remote Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.
Management), the authenticated user can access the services through the control panel based on
the permission information obtained from the remote server.
• When a guest user is permitted to use the machine, access restriction for each service cannot be
specified for the guest user. If you want to restrict a guest user to use the machine, refer to "Smart
Card Logout Timing" (P.548).