Fuji Xerox Versant 80 Press User Manual page 826

22 Problem Solving
Error Code
027-736 [Cause]
[Remedy] Enable the server certificate validation. Or, disable the server certificate validation for
027-750 [Cause]
[Remedy] The Print feature is unavailable for scanned documents. Set the job flow correctly.
027-751 [Cause]
[Remedy] Confirm the settings of the job flow.
027-752
[Cause]
[Remedy] Take one of the following measures:
027-753 [Cause]
[Remedy] For 1), have your system administrator confirm the port status.
027-754
[Cause]
22
[Remedy] Check the DocuWorks and PDF signatures for both the system data settings (machine's
027-757
[Cause]
[Remedy] For 1), Check connection between the machine and the server, or the machine and the
027-760
[Cause]
[Remedy] Confirm the specified parameter.
826
Cause and Remedy
The server certificate verification feature of the machine is disabled when the server
certificate verification is required.
data transfer.
Attempted to execute a print transmission to the scanned document.
An error occurred during job flow processing.
A mandatory entry field is blank in the job flow.
Do not link folders to job flows that have mandatory entry fields.
Set the default values to the mandatory fields of the job flow.
1)Attempted to execute the service while the port necessary for the job flow is either
deactivated or disabled.
2)Attempted to execute a job flow to send e-mail using the Encryption or Digital
Signature feature while S/MIME communication is disabled.
For 2), enable S/MIME communication, or modify the job flow so that e-mail is sent by
not using the Encryption or Digital Signature feature.
[DocuWorks Signature] or [PDF Signature] is set inconsistency in the job flow.
current settings) and the executed job flow settings. If these settings differ, coordinate
them.
Probable causes are as follows:
1)An error occurred while connecting the server.
2)The reliable certificate has not been registered on the machine.
3)The server addresses of the SSL server and the destination server are not same.
4)The machine tries to communicate with the server using the encryption method which
is not supported on the machine.
5)The SSL client certificate has not been registered on the machine.
6)The server certificate has been expired or will be expired soon.
DNS server using ping or trace route.
For 2), Import the CA certificate and intermediate certificate reliable to the SSL server
to the machine.
For 3), Check whether or not the machine communicates via the SSL proxy server which
enables you to confirm the SSL communication. When the machine uses the server, set
the machine not to use the SSL proxy server.
For 4), Check the encryption method supported on the machine. Set the available
encryption method to the SSL server setting.
For 5), Import the SSL client certificate and configure the setting to use the certificate.
For 6), Check the date and time registered on the machine is precise. If they are not,
adjust the gap.
An invalid parameter is specified by XJT command.