Fuji Xerox Versant 80 Press User Manual page 922

23 Appendix
Finisher D4 (optional) / Finisher D5 (optional)
Type
Paper Size
Paper Weight
Stacker
Capacity
Note
When using
FX P Paper.
23
Staple
Punch
922
Output Tray
Finisher Tray
Output Tray
Finisher Tray
Output Tray
Finisher Tray
Output Tray
Finisher Tray
(with no staple)
Finisher Tray
(with staple)
Capacity
Paper Size
Position
Number of Holes
Paper Size
Paper Weight
Collate / Stack
Collate / Stack (offset stacking available)
Standard size: Maximum: A3, 11 x 17" mm
Minimum: Postcard
Non-standard size: Maximum: 330 x 488 mm
Minimum: 98 x 148 mm
Standard size: Maximum: A3, 11 x 17"
Minimum: B5
Non-standard size: Maximum: 330 x 488 mm
Minimum: 182 x 182 mm
52 - 350 gsm
52 - 300 gsm
500 sheets
A4 :
Finisher D4: 3,000 sheets,
Finisher D5: 2,000 sheets
B4 or larger: 1,500 sheets
*
Mix stack: 350 sheets
* : When using FX P Paper.
*
Important • When larger size papers are loaded on smaller
size papers.
A4 :
Finisher D4: 200 sets or 3,000 sheets
Finisher D5: 200 sets or 2,000 sheets
B4 or larger: 100 sets or 1,500 sheets
100 sheets
Important • When using FX P Paper.
• 65 sheets when using paper larger than A4 / 8.5
× 11".
Staples may be bent depending on the deployment
conditions such as Paper Weight.
Standard Size: Maximum: A3, 11 × 17"
Minimum: B5
<1 place>
Front: Angled stapling
Center: Parallel stapling
Rear: Parallel stapling
Angled stapling (A3 and A4
<2 places>
Parallel stapling
<4 places>
Parallel stapling
2 or 4, 3 (optional)
Maximum: A3, 11 × 17"
Minimum: B5 (2 holes), A4 , 8.5 x 11"
52 - 220 gsm
only)
(4 holes)