Fuji Xerox Versant 80 Press User Manual page 669

2
Hold the handle [R1] at the position shown in
the figure.
3
Pull out the unit.
4
Hold the tab of the staple cartridge to remove
it from the unit in the direction of the arrow as
shown in the figure.
5
Push a new staple cartridge into the unit.
6
Push the removed unit back to the original
position.
7
Close the finisher right door.
Note • A message will be displayed and the machine will not operate if the finisher right door is even
slightly open.
Replacing Consumables
669
21