When The D4/D5 Folder Unit Is Installed - Fuji Xerox Versant 80 Press User Manual

22 Problem Solving
2
Move the handle [3g] (1) and turn the knob [3f]
(2). Remove the jammed paper.
Note
3
Return the handle [3g] to its original position.
4
Close the finisher right door.
Note
Paper Jams at the Unit [3g] and the Knob [3c]
22
1
Make sure that the machine has stopped, and
open the finisher right door.
2
Move the handle [3g] (1) and turn the knob
[3c] to the right (2). Remove the jammed
paper.
Note
878
• If paper is torn, check for any torn pieces of
paper inside the machine.
• The direction to turn the knob depends on
where the paper jam occurs. Follow the
instruction displayed on the screen.
• If you cannot see jammed paper, check
handle [3b]/[3d] as well.
• A message will be displayed and the machine will not operate if the finisher right door is even
slightly open.
• If paper is torn, check for any torn pieces of
paper inside the machine.
• If you cannot see jammed paper, check
handle [1d] , and [3b]/[3d] as well.

• When the D4/D5 Folder Unit is installed,

check the handle [2a] as well.