Fuji Xerox Versant 80 Press User Manual page 797

Error Code
018-718 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "18" (inappropriate matching) for Address
Book query.
[Remedy] The LDAP server has an attribute problem. Have your network administrator confirm the
LDAP server status.
018-719 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "19" (constraint violation) for Address Book
query.
[Remedy] The LDAP server has an attribute problem. Have your network administrator confirm the
LDAP server status.
018-720 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "20" (attribute exists) for Address Book
query.
[Remedy] The LDAP server has an attribute problem. Have your network administrator confirm the
LDAP server status.
018-721
[Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "21" (invalid syntax) for Address Book
query.
[Remedy] The LDAP server has an attribute problem. Have your network administrator confirm the
LDAP server status.
018-722 [Cause] The machine cannot connect to Google Cloud Print, because of a network error.
[Remedy] Check that the network cable is connected properly. Also check that the environmental
settings are adequate.
018-723 [Cause] The machine cannot connect to Google Cloud Print, because of a certificate error.
[Remedy] Check that the root CA certificate registered to the machine and the certificate
verification settings are correct.
018-724
[Cause] The machine cannot connect to Google Cloud Print, because of an SSL communication
error.
[Remedy] Check the SSL settings.
018-725 [Cause] The user password set in the Kerberos server expired.
[Remedy] Extend the expiration date of the password.
018-726
[Cause] The root (or intermediate) CA certificate on the smart card is not registered on the
machine.
[Remedy] Register the root (or intermediate) CA certificate on the smart card on the machine.
018-727 [Cause] Authentication by the Kerberos server failed.
[Remedy] Check the certificate on the smart card, and then update the certificate if it is invalid or
revoked. Also, check whether the certificate is enabled in the server.
018-728 [Cause] Authentication by the Kerberos server failed.
[Remedy] Take one of the following measures:
Cause and Remedy
When the root CA certificate of the KDC certificate is not registered, register the root
CA certificate.
When the KDC certificate is revoked, update the KDC certificate of the server.
Confirm that the address of the Kerberos server set in the machine and the address
on the KDC certificate of the server match.
Error Code
22
797