Fuji Xerox Versant 80 Press User Manual page 788

22 Problem Solving
Error Code
017-784 [Cause]
017-785
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
017-786
018-400
[Cause]
[Remedy] Remove the inconsistency of the IPSec settings, and enable IPSec again.
018-405 [Cause]
[Remedy] The account is disabled in the active directory of the authentication server, or the access
018-406
[Cause]
018-407
[Remedy] Set different IP addresses to each Ethernet. When setting the same IP address to each
018-408
[Cause]
22
[Remedy] Change the IPv4 address of Ethernet2.
018-409 [Cause]
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-410 [Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
018-411 [Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
018-412
[Cause]
018-413
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-414 [Cause]
[Remedy] Set the IP address correctly.
018-415 [Cause]
[Remedy] Change the [Manually Configured IPv6 Address] on the machine, or the IP address of
018-416 [Cause]
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-500 [Cause]
[Remedy] Configure the server certificate. Or, cancel authentication.
018-501 [Cause]
[Remedy] Check the network connection and the address of the CA server.
788
Cause and Remedy
An internal error occurred during image processing.
Support Center.
Although IPSec is enabled, the IPSec settings are inconsistent.
Although [Authenticated by Preshared Key] is set in [IKE Authentication Method], a
passcode is not set.
Although [Authenticated by Digital Signature] is set in [IKE Authentication Method],
an IPSec certificate is not set.
When [Authenticated by Preshared Key] is set in [IKE Authentication Method], set the
passcode.
When [Authenticated by Digital Signature] is set in [IKE Authentication Method], set
an IPSec certificate.
An error occurred during LDAP authentication.
is set to disabled. Consult your network administrator.
The machine detects the identical IPv4 addresses when Ethernet1 and Ethernet2 are
connected to different network and the setting of identical addresses is prohibited.
Ethernet, contact our Customer Support Center.
The IPv4 address already exists in the network of Ethernet2.
The IPv6 address already exists in the network of Ethernet2.
Updating of the IPv4 address and host name for the DNS server failed on the network
of Ethernet2.
Updating of the IPv6 address and host name for the DNS server failed on the network
of Ethernet2.
The IPv6 address already exists in the network of Ethernet2.
IP address for IPv6 set manually in Ethernet2 is incorrect.
IP address for IPv6 set manually in Ethernet2 is incorrect.
IPv6 on the network device, to remove the duplication of addresses.
The IPv6 address already exists in the network of Ethernet2.
The certificate does not exist in the authentication server.
Communications with the CA server set in the machine failed.