Alignment Adjustment Setup - Fuji Xerox Versant 80 Press User Manual

21 Maintenance

Alignment Adjustment Setup

The following describes how to save result of Auto Alignment Adjustment in Alignment
Adjustment Type and to assign to a tray.
1
Select a type to set the alignment adjustment
setting and select [Change Settings].
2
Enter the type name and select [Save].
Note
3
Select [Sample Printout].
21
4
Select a tray to assign the alignment adjustment settings and select 2 Sided, Output Color,
and Number of Sheets.
Note
5
Select <Start>.
The current sample printout is printed.
If the position of the sample printout is correct, a line is printed at a position 15 mm from
the edge of the paper. If the position of the line on the sample printout is misaligned, adjust
it.
Note
6
Select [Save].
7
Select [Close].
8
Check the sample printout, and adjust the position if it is misaligned.
692
• We recommend that you use a name with
which you can recognize the content.
• You are recommended to average the variations that you print three and more sheets.
• A dark black patch is printed on the image of side 1 and a light black patch is printed on the image
of side 2 of the sample printed with [Sample Printout]. A color patch is printed to show the paper
feed direction.
Black patch
Paper feed direction
X direction
Color patch
QR code