Fuji Xerox Versant 80 Press User Manual page 822

22 Problem Solving
Error Code
027-531 [Cause]
[Remedy] When [Rename New File] is set as the process to be executed when file names are
027-532 [Cause]
[Remedy] When [Rename New File] is set as the process to be executed when file names are
027-533
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
027-543 [Cause]
[Remedy] Check whether the server name of the SMB server is correct.
027-547
[Cause]
[Remedy] If the error occurred during SMB authentication:
22
027-548
[Cause]
[Remedy] Have your network administrator set the user name on the server authorized characters.
822
Cause and Remedy
Detected an incorrect filing policy (when add was selected) after connecting to the
server.
duplicate, confirm that the file format is not multi-page.
Failed to access the NEXTNAME.DAT file.
duplicate, check the NEXTNAME.DAT file is correct.
An internal error occurred.
Support Center.
The SMB server (NetBIOS) name is invalid.
SMB protocol error. An invalid character was detected in the specified domain name.
Consult your network administrator for the domain name, and then set it correctly.
Also, check whether the domain name set on the machine is correct.
To confirm the settings, execute the following procedures:
1)Enter the System Administration mode, and select [Tools] > [System Settings] >
[Connectivity & Network Setup] > [Remote Authentication/Directory Service] > [SMB
Server Settings].
2)Select the SMB server to confirm the domain name.
If the error occurred during transferring using SMB of the Scan to PC service:
Consult your network administrator whether the domain name specified when entering
login name is correct.
To confirm the domain name on the server, execute the following procedures:
1)Select [Start] > [Programs] > [Administrative Tools] > [Active Directory Domains and
Trusts] on the Active Directory domain controller.
2)From the left side frame of the [Active Directory Domains and Trusts] window, select
[Active Directory Domains and Trusts] > [Domains]. Right-click [Domains] to select
[Properties].
3)Select [General] tab in the domain properties window, and confirm the domain name
(prior to Windows 2000).
SMB protocol error. An invalid character has been detected in the specified user name.
To confirm the user name on the server, execute the following procedures:
1)Select [Start] > [Programs] > [Administrative Tools] > [Active Directory Users and
Computers] on the Active Directory domain controller where the user information is
set.
2)Select [Active Directory Users and Computers] > [Server] > [Domains] > [Users] from
the left side frame of the [Active Directory Users and Computers] window, to display
the user information.
3)Right-click the target user from the right side frame of the [Active Directory Domains
and Trusts] window to select [Properties].
4)Select the [Account] tab in the [User Properties] window, and confirm the user name
of [User Log On Name (Prior to Windows 2000)].