Fuji Xerox Versant 80 Press User Manual page 75

No. Component
5 <Custom Button 1> (Copy)
6 <Custom Button 2> (Not in
Use)
7 <Custom Button 3> (Review)
8 <Log In/Out> button
9 <Clear All> button
10 <Power Saver> button
11 <Interrupt> button
12 <Stop> button
13 <Start> button
14 Numeric keypad
15 <Speed Dial> button
16 <C (Clear)> button
17 <Dial Pause> button
18 <Machine Status> button
19 <Job Status> button
20 <Services Home> button
"Copy" is assigned to this button by default.
Press this button to display the [Copy] screen.
For information on how to assign a service to the button, refer to "Assigning Services to the
Custom Buttons" (P.78).
Press this button to call its associated service.
To the button, you can assign [Language] or any service displayed on the
Services Home screen.
For information on how to assign a service to the button, refer to "Assigning Services to the
Custom Buttons" (P.78).
"Review" is assigned to this button by default.
On the [Review] screen, you can check a list of the status of Copy and Scan
services whose settings have been changed from the defaults. You can also
check the details of e-mail recipients.
For information on how to assign a service to the button, refer to "Assigning Services to the
Custom Buttons" (P.78).
Lights up when a user is authenticated in the System Administration mode,
the Authentication mode, or the Accounting mode. Press this button to
display the User ID entry screen for entering the System Administration
mode, the Authentication mode, or the Accounting mode. Also press this
button to exit these modes.
Returns the settings you made to the default values. The machine returns to
the same state as when it is powered on.
When the machine is not used for a while, it enters the Power Saver mode to
reduce power consumption. When the Power Saver mode is active, the
<Power Saver> button lights up.
Press this button to enter or exit the Power Saver mode.
Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
For notes and restrictions on the Interrupt mode, refer to "Notes and Restrictions on the
Interrupt Mode" (P.997).
Press this button to pause the current copy job or communications.
Press this button to start scanning a document.
Use the numeric buttons on the keypad to enter the number of copies,
passwords, and other numerical values.
This button is not for use.
Press this button to cancel a numerical value you have entered with the
numeric keypad.
This button is not for use.
Press this button to check the machine status and meters, to check the
status of the consumables, and to print reports.
Press this button to check or cancel the current job, to check or print stored
jobs, or to check completed jobs.
Press this button to display the Services Home screen.
You can change the services displayed on the Services Home screen. For more information,
refer to "Customizing the Services Home Screen" (P.79).
Function
Control Panel
2
75