Step 3 Entering A Quantity; Step 4 Starting The Copy Job - Fuji Xerox Versant 80 Press User Manual

"Image Quality" (P.153)
"Layout Adjustment" (P.160)
"Output Format" (P.174)
"Job Assembly" (P.205)

Step 3 Entering a Quantity

You can enter up to 9999 sets.
1
Enter the number of copies using the numeric
keypad.
The number of copies entered appears on the
upper right of the touch screen.
2
If you have entered an incorrect value, press
the <C (Clear)> button and then enter the
correct value.

Step 4 Starting the Copy Job

1
Press the <Start> button.
Important • If the document has been loaded in the
Note
If you have more documents
If you have more documents to copy, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to scan the documents as a single set of
data.
document feeder, do not hold down the
document while it is being conveyed.
• Copies cannot be made if a copy protection
code is detected.
• If a problem occurs, an error message
appears on the touch screen. Follow the
instructions of the message to solve the
problem.
• You can set the next job during copying.
Copying Procedure
Numeric keypad
<C (Clear)> button
1 2 3
4 5 6
7 8 9
0 ＃
C
Start
<Start> button
4
129