Fuji Xerox Versant 80 Press User Manual page 530

13 Tools
For more information on the [File Format] screen, refer to "Scan" (P.215).
Resend Attempts
Set whether or not to try sending again if a transmission fails. If you select [On], set the
number of resend attempts and interval.
Name, Server, Shared Name, Save in, User Name, and Password
Select [Name], [Server], [Shared Name], [Save in], [User Name], or [Password] to display an
input screen.
The numbers of characters you can input are as follows:
Print
Configure print settings. When [On] is selected, you can configure the settings for the Print
feature.
Print Quantity
Set the number of copy sets from 1 to 999 in 1 set increments.
Paper Supply
13
Select a paper tray for printing. When [Auto Select] is selected, the same paper size as the
document size is used.
2 Sided Printing
Set the 2 sided printing option.
530
Resend Attempts
Set the transmission retry count from 1 to 5.
Resend Interval
Set the transmission retry interval from 30 to 300 seconds.
Name: Up to 18 single-byte characters
Server: Up to 64 single-byte characters
Shared Name: Up to 64 single-byte characters
Save in: Up to 128 single-byte characters
User Name:
For domain users: up to 97 characters with the format of "user name@domain name" or
"domain name\user name"
(user name and domain name must be up to 32 and 64 single-byte characters,
respectively)
For local users: up to 32 single-byte characters
Password: Up to 32 single-byte characters
Auto Select
A suitable paper tray is automatically selected.
Trays 1 to 3, 6 (optional) and Tray 7 (optional)
Select paper from five trays.
Bypass
Prints on paper loaded in Tray 5.