Fuji Xerox Versant 80 Press User Manual page 120

3 Paper and Other Media
6
Likewise, load the remaining envelopes in the
tray and align the bottom edge of the
envelopes in the arrow direction (1). Pinch the
left short-side paper guide and slide it to the
desired paper size (2).
Important • The number of sheets that can be loaded
7
Push the tray in gently until it stops.
Note
3
120
varies depending on the type of envelopes.
For more information, contact our Customer
Support Center.
• If envelopes loaded in the tray are 10 sheets
or less, the guides apply more pressure to the
envelopes. It may cause distortion of the envelopes, and may cause paper jams.
• When loading envelopes, neatly align all edges. Also, if the envelopes loaded are tipped, reduce the
number of envelopes loaded.
• Position the guides correctly to match the envelope size. Otherwise, the envelope may not be fed
properly and cause paper jams.
• When removing the HCF Post Card Kit from
the tray, completely loosen the screw before
removing the kit. Place the removed HCF Post
Card Kit back to its original location (1). Then,
tighten the screw (2) for storing.