Fuji Xerox Versant 80 Press User Manual page 807

Error Code
021-408 [Cause] A time out error occurred while connecting to the EP system via the Internet.
[Remedy] Check the followings:
If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
Also, when FQDN of the EP communication aggregate server is changed for the EP
communication aggregate server configuration, contact our Customer Support Center.
021-409 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
021-410 [Cause] A communication error occurred while connecting (acquiring the EP certificate) to CA
via the Internet.
021-411
[Remedy] Check the followings:
If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
021-412
[Cause] An error occurred while connecting to the EP system via the Internet. There is a problem
with the address of the EP proxy server name.
[Remedy] Check the followings:
If the error still is not resolved after checking the above settings, there may be a network
failure. Consult your system administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
Cause and Remedy
LAN cable connection
DNS server address setting
The default gateway setting
The subnet mask setting
EP proxy server setting (For BB-Direct configuration)
LAN cable connection
DNS server address setting
The default gateway setting
The subnet mask setting
EP proxy server setting (For BB-Direct configuration)
The LAN cable connection
The DNS server address settings
The default gateway setting
The subnet mask setting
The EP proxy server URL setting
Error Code
22
807