Fuji Xerox Versant 80 Press User Manual page 845

Error Code
116-738 [Cause] The size and orientation of the form specified are not matched with the paper to be
printed.
[Remedy] Match the size and orientation of the paper with the form specified, and print again.
116-739
[Cause] The form or logo data cannot be registered because memory for the form and logo data
or memory capacity for the hard disk are insufficient.
[Remedy] Delete unnecessary data, or free up the space for the form memory.
116-740 [Cause] A numerical value operation error occurred because a value exceeding the value limit of
the machine was used in the print data.
[Remedy] Check the print data.
116-741 [Cause] The form cannot be registered because the number of the form registration exceeds the
maximum number allowed.
[Remedy] Delete unnecessary form. The maximum number allowed is 2048.
116-742
[Cause] The logo data cannot be registered because the number of the logo data registration
exceeds the maximum number allowed.
[Remedy] Delete unnecessary logo data.
116-743 [Cause] The logo data or form cannot be registered because the memory for the form and logo
data are insufficient.
[Remedy] Increase memory.
116-746 [Cause] The form specified is not registered.
[Remedy] Use the form registered, or register the form.
116-747 [Cause] The paper margin value is too large for the HP-GL/2 active coordinates area.
[Remedy] Decrease the paper margin value, and then execute the operation again.
116-748
[Cause] There is no plot data in the HP-GL/2 print data.
[Remedy] Check the print data.
116-749 [Cause] The job was cancelled because the specified font does not exist.
[Remedy] Install the font, or set the print driver to replace the font.
116-750 [Cause] Banner sheet tray malfunction
[Remedy] Restore the tray to normal condition or change the Banner sheet tray.
116-751
[Cause] The process has been canceled because the hard disk is full.
[Remedy] Delete stored data in the hard disk. If the error still is not resolved, split the file and send
the job again.
116-752 [Cause] The descriptions of the PDF or XPS printing job ticket have a problem.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
Note • XPS stands for XML Paper Specification.
116-771 [Cause] The data was automatically modified because it included an invalid parameter.
116-772
[Remedy] The printed image may be incomplete. Confirm with the sender whether the image has
116-773
a problem, or ask the sender to send the data again.
116-774
116-775
116-776
116-777
116-778
Cause and Remedy
Error Code
22
845