Fuji Xerox Versant 80 Press User Manual page 731

Symptom
Printed sheets The printed sheets of
output to a tray especially coated or
stick together. heavyweight paper are more
prone to stick together in
environments with high
temperatures or when a large
number of sheets are output.
Is the specified size paper
A document is not
printed although loaded in the tray?
you sent a print
job for the High
Capacity Feeder.
Paper is not fed Are the weight switch buttons
from Tray 6 or 7. set to the weight of the
paper?
Tray 6 or 7 cannot Is the power breaker switch
be selected on the on the side of the High
control panel. Capacity Feeder turned off?
Unsatisfactory A probable cause is an image
print quality. defect.
Unable to print Non-standard fonts are used
text correctly. for printing.
(Text is garbled.)
Unable to insert Did you open a cover or turn
or remove a paper the machine off during
tray. printing?
Unable to copy Is the document glass or the
with the specified document cover dirty?
size.
Is the document a
transparent type such as a
transparency film?
Is the document in the correct
position?
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Is the document folded?
Is the document a non-
standard size?
Cause
For the Offset Catch Tray, you can prevent
this problem by adjusting the air volume of
the Catch Tray Fan (optional). For
information on how to adjust air volume,
refer to the user documentation attached to
the Catch Tray Fan.
Follow the instructions displayed to load
paper of the correct size, and then try again.
Refer to "Loading Paper in Tray 6 (HCF B1)" (P.107) or
"Loading Paper in Tray 6 (HCF B1-S)/Trays 6 and 7
(High Capacity Feeder C3-DS)" (P.109).
For paper exceeding 256 gsm, set the weight
switch buttons to the heavier weight group.
Refer to "About Weight Switch Buttons" (P.121).
Turn on the power breaker switch.
Refer to "Product Overview" (P.53).
Resolve the problem by referring to "Image
Quality Trouble".
Refer to "Image Quality Trouble" (P.734).
Check the application or print driver settings.
Do not forcibly insert or remove the paper
tray. Switch off the power. In a few seconds,
switch on the power. When the machine is
ready to receive data, insert or remove the
paper tray.
Clean the document glass and the document
cover.
Refer to "Cleaning the Document Cover and Document
Glass" (P.679).
Place the document on the document glass,
and place a white sheet on top of the
document when copying.
Load the document correctly.
Refer to "Copying Procedure" (P.126).
Adjust the document guide positions.
Refer to "Copying Procedure" (P.126).
Unfold and correctly load the document.
Refer to "Copying Procedure" (P.126).
Specify the document size.
Refer to "Copying Procedure" (P.126).
Machine Trouble
Remedy
731
22