Power Source; Switching The Main Power On; Switching The Power On - Fuji Xerox Versant 80 Press User Manual

2 Product Overview

Power Source

The machine is provided with the power switch and the main power switch.
Main power switch
When you press the main power switch to the
[
out on the right side of the control panel, and
the machine powers off.
Power switch
To use the machine, press the power switch to
switch its power on. You can start operations
after the machine warms up.
2

Switching the Main Power On

Important • Do not switch off the main power immediately after switching on the main power. This may
1
Make sure that the power cord is plugged in correctly.
2
Open the machine front door.
3
Press the main power switch to the [ | ] position
to switch the main power on.
The <Main Power> indicator lights up on the
control panel.
4
Close the machine front door.

Switching the Power On

The machine takes approximately 5 seconds to warm up and to be ready to copy or print
after switching the power on. This may take more time depending on your machine
configuration.
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
Use also the Power Saver feature to save power consumption while the machine is not in use.
For information on the Power Saver feature, refer to "Power Saver Mode" (P.70).
64
] position, the <Main Power> indicator goes
damage the hard disk and the memory or cause a machine malfunction.
Power switch
Main power switch