Fuji Xerox Versant 80 Press User Manual page 823

Error Code
027-549 [Cause] SMB protocol error
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-564
[Cause] SMB protocol error. The SMB server was not found.
[Remedy] Check whether the connection between the authentication server and the machine has
been established via a network.
For example, confirm the following conditions:
027-565 [Cause] SMB protocol error
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-566 [Cause] SMB protocol error. SMB (TCP/IP) is not active.
[Remedy] Enter the System Administration mode, and select [Tools] > [Connectivity & Network
Setup] > [Port Settings]. On this screen, confirm the SMB client is set to [Enabled].
027-569 [Cause] The SMB (TCP/IP) port is not activated.
[Remedy] Enter the System Administration mode, and select [Tools] > [Connectivity & Network
Setup] > [Port Settings]. On this screen, confirm the SMB client is set to [Enabled].
027-572
[Cause] SMB protocol error
027-573
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
027-574
Support Center.
027-576
027-578
027-584 [Cause] SMB protocol error. The SMB server is in shared security mode.
[Remedy] The SMB server may be set on Windows 95, Windows 98, or Windows Me OS. Set the
SMB server on an OS other than Windows 95, Windows 98, or Windows Me OS.
027-585
[Cause] SMB protocol error. Login is disabled at this time.
[Remedy] Confirm the period login permitted with your system administrator.
027-586 [Cause] SMB protocol error. The password has expired.
[Remedy] Obtain a valid password from your system administrator.
027-587 [Cause] SMB protocol error. The password must be changed.
[Remedy] Log into Windows, and change the password. Ask your system administrator to change
the setting so that you do not need to change the login password next time.
027-588 [Cause] SMB protocol error. The user is invalid.
[Remedy] Ask your system administrator to validate the user.
027-589 [Cause] SMB protocol error. The user was locked out.
[Remedy] Ask your system administrator to cancel the lockout status.
027-590 [Cause] SMB protocol error. The user account has expired.
[Remedy] Obtain a valid user account from your system administrator. Or, ask your system
administrator to extend the account expiration date.
027-591 [Cause] SMB protocol error. Users are restricted. A blank password is invalid.
[Remedy] Set the password for the user.
Cause and Remedy
Network cable connection
TCP/IP settings
Connection via Port 137 (UDP), Port 138 (UDP), and Port 139 (TCP)
Error Code
22
823