Fuji Xerox Versant 80 Press User Manual page 146

4 Copy
When you select [Standard Size] or [Custom Size], refer to "When [Standard Size] is Selected" (P.146) or "When [Custom Size]
is Selected" (P.146), respectively.
When you select [Standard Size], [Preset Custom Size], or [Custom Size], refer to "When [Standard Size] is Selected" (P.146),
When [Preset Custom Size] is Selected" (P.219)" or "When [Custom Size] is Selected" (P.146), respectively.
Paper Type & Paper Weight
Select a paper type and paper weight.
Adjust Paper Curl
For information on [Adjust Paper Curl], refer to "Changing the Paper Settings" (P.123).
Alignment Adjustment
For information on [Alignment Adjustment], refer to "Changing the Paper Settings" (P.123).
Adjust Paper Curl
For information on [Adjust Fold Position], refer to "Changing the Paper Settings" (P.123).
When [Standard Size] is Selected
Select [Standard Size], and from the lists displayed, select a paper size and then a paper
type.
4
1
Select a paper size and a paper type.
Note
2
Select a paper type, paper weight, and
adjustment type.
Paper Type & Paper Weight
Select a paper type and paper weight.
Adjust Paper Curl
For information on [Adjust Paper Curl], refer to "Changing the Paper Settings" (P.123).
Alignment Adjustment
For information on [Alignment Adjustment], refer to "Changing the Paper Settings" (P.123).
Adjust Paper Curl
For information on [Adjust Fold Position], refer to "Changing the Paper Settings" (P.123).
When [Preset Custom Size] is Selected
Select [Preset Custom Size]. From the lists displayed, select a paper size.
The non-standard sizes which have been registered are displayed on the list.
Note
When [Custom Size] is Selected
Enter the width and length of the original document.
146
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• The list can be scrolled by drag or flick
operation. For information on how to drag or
flick, refer to "Touch Screen" (P.88).
• Up to 100 non-standard sizes can be displayed on the list. The 100 nonstandard sizes which are 200
mm x 200 mm are set by the factory default. These sizes cannot be deleted.
• When the name of non-standard size is registered, the name is displayed on the list. For information
on registering the non-standard size, refer to "Preset Custom Size" (P.434).