Paper Tray Priority - Fuji Xerox Versant 80 Press User Manual

For information on [Alignment Adjustment], refer to "Auto Alignment Adjustment Settings" (P.688) or "Manual Alignment
Adjustment" (P.695).
Adjust Fold Position
When outputting copies using a folding or booklet binding option, you can adjust the
folding position. Select from [Default Value], or [Type 1] to [Type 10].
Note
For information on [Adjust Fold Position], refer to "Fold Position Adjustment" (P.709).
Custom Paper Color Settings
Specify the color name you want to assign to custom paper (Custom Paper Color 1 to 5).
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 to 3, and 6 (optional) and 7 (optional). You cannot apply this
setting to Tray 5.

Paper Tray Priority

Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for
automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Trays 1 to 3, and 6 (optional) and 7 (optional). You cannot apply this
setting to Tray 5.
Note
Tray 5 - Paper Size Defaults
Select the paper sizes displayed in the [Tray 5] screen in [Paper Tray Attributes] when
copying with Tray 5.
You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray
5] screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
A/B Series Size
You can select a paper size from A and B series sizes.
Inch Size
You can select a paper size from inch series sizes.
• Only pre-registered adjustment types are displayed. You can register a adjustment type under
[Tools] > [System Settings] > [Common Service Settings] > [Paper Tray Settings] > [Custom Paper
Settings] > [Adjust Fold Position], or under [Tools] > [System Settings] > [Common Service Settings] >
[Maintenance] > [Finisher Adjustment].
• When a logical printer is used and if you specify the paper tray with the print driver, this setting will
be ignored.
Common Service Settings
433
13