Fuji Xerox Versant 80 Press User Manual page 537

Passcode
Set a passcode. Setting a passcode is strongly recommended for security. Set a passcode
from 4 to 12 digits.
Note
For information on how to change your passcode later, refer to "Changing Passcode" (P.660).
E-mail Address
Enter an e-mail address with up to 128 characters. The address set here will be set as [From]
under [E-mail].
For information about how to enter characters, refer to "Entering Text" (P.90).
Device Access
Set whether to allow the machine use.
Enabled
Allows the machine use. When the smart card reader is connected, you can select the
settings for each Login Type.
Disabled
Prohibits the machine use.
Service Access
You can place restrictions on the use and the maximum number of allowed pages for each
of the Copy, Scan, and Print services.
1
Select [Service Access].
2
Select a feature to restrict.
3
To set account limits, select [Change Account Limit], and then enter the maximum number
of pages with the numeric keypad.
Feature Access
Set access restrictions on features.
Free Access
The feature is not restricted.
No Access to Copy/Scan/Print Service
Allows you to restrict the use of the Copy, Scan, or Print service.
Change Account Limit
Set the maximum number of pages for copying, scanning, or printing.
You can specify a number from 1 to 9,999,999 (7 digits) pages in 1 page increments.
• When [Passcode Entry for Control Panel Login] is set to [On], a passcode entry is required upon user
authentication.
Accounting
13
537