Fuji Xerox Versant 80 Press User Manual page 908

22 Problem Solving
5
Remove the jammed staples (1), and return the
metal part pushed down in step 4 to its original
position (2).
Be careful in removing jammed staples.
6
Return the booklet staple cartridge to its
original position.
7
Slightly push the booklet staple cartridge
upward, and make sure that it clicks into place.
Note
22
8
Return the booklet unit to its original position.
9
Close the finisher front door.
Note
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
When the Finisher D4 with Booklet is installed
The following describes how to clear staple jams in the booklet staple cartridge when the
Finisher D4 with Booklet (optional) is installed.
908
CAUTION
• Return the booklet staple cartridge until ( )
of the booklet staple cartridge is fitted in ( )
of the booklet unit.
• If the door is not closed completely, a message appears and the machine will remain paused.