Other Errors - Fuji Xerox Versant 80 Press User Manual

Table of Contents

Advertisement

Error Code
127-310
[Cause]
127-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
127-312
127-313
127-314
127-315
127-320
127-353
127-354
127-396
127-398
127-399
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
Note

Other Errors

This section describes the remedies when the following messages are displayed.
Error Message
A fault has occurred.
[Cause]
Switch off the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
(xxx-yyy)
Completed with an
[Cause]
error.
[Remedy] Execute the operation again.
(xxx-yyy)
A fault has occurred.
[Cause]
The machine has
rebooted. Select
[Remedy] Select [Close] to use the machine normally. If the error still is not resolved,
[Close]. If the problem
persists, call for service.
(xxx-yyy)
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
An error occurred in the machine.
on the machine power. If the same message is displayed again, turn off the machine
once, then turn the machine on holding down both the <Start> and <Stop> buttons
simultaneously for six seconds. This deletes the print data that caused the error. If the
error still is not resolved, contact our Customer Support Center.
• If you cannot resolve an error despite following the instructions described in the table, contact our
Customer Support Center. The contact number is printed on the label or card attached on the
machine.
An error occurred.
then switch the machine power on again.
If the message persists, record the content displayed for [(xxx-yyy)]. Then
immediately switch the main power and power off, make sure that the touch
screen is blank, and then contact our Customer Support Center.
An error occurred, and the operation terminated abnormally.
An auto-recoverable internal error occurred, and the machine restarted
automatically.
contact our Customer Support Center.
Cause and Remedy
Cause and Remedy
Error Code
22
851

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents