Fuji Xerox Versant 80 Press User Manual page 963

Parameter Item No.
Paper tray 103
Coordinate 104
rotation
Color mode 105
Extended Settings
Parameter Item No.
Auto layout 106
Active palette 107
No. of prints 108
Output 109
destination
2 sided printing 110
Alphanumeric 112
fonts
Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[5] : Tray 5
[6] : Tray 6 (High Capacity Feeder)
[7] : Tray 7 (High Capacity Feeder)
Important • When Trays 1 to 3, Tray 6 or Tray 7 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper size] cannot be set.
Note • When [Auto] is selected and paper of the same size in the same orientation
in multiple trays is loaded, paper will be fed in the order of Tray 1
Tray 3 Tray 6
trays but in different orientations, feeding of the paper loaded in the
landscape orientation is prioritized.
Sets the paper orientation for printing.
[0] (Default) : 0 degree
[1] : 90 degree
Sets the color mode.
[0] : Color
[1] (Default) : Grayscale
[2] : Black pen
Selects whether to perform auto layout of the document or not.
[0] (Default) : ON
[1] : OFF
Selects whether to use a pen specified by command or set on the panel.
[0] (Default) : Command
[1] : Panel
Sets the number of copy to be printed.
[1] - [250] (Default: 1) : 1 - 250
Sets the output tray for the printouts.
[0] (Default) : Right Top Tray
[80] : Right Middle Tray (optional)
Sets 2 sided printing.
[0] (Default) : None
[1] : Head to head
[2] : Head to toe
Sets the font for single-byte characters.
For more information on fonts, refer to "Internal Fonts" (P.929).
[0] (Default) : Stroke
[1] : Roman
[2] : Sans serif
Value
Tray 7. If paper of the same size is loaded in multiple
Value
HP-GL/2 Emulation
Tray 2
23
963