Step 2 Configuring The Snmp Port; Step 3 Configuration On The Computer - Fuji Xerox Versant 80 Press User Manual

17 Scanner Environment Settings
5
Select [Close] repeatedly until the [Tools] screen is displayed.
6
Select [Close].
Note
7
Print a configuration report to confirm that the SOAP, SNMP, and Internet Services (HTTP)
ports are enabled and that TCP/IP is set up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.622).

Step 2 Configuring the SNMP Port

Configure the transport protocol for the SNMP port using CentreWare Internet Services.
1
Start CentreWare Internet Services.
17
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.557).
2
Configure the transport protocol for the SNMP port.
1) Click the [Properties] tab.
2) Click [Connectivity].
3) Click [Port Settings].
4) Select the [UDP] check box under [SNMP].
5) Click [Apply].
6) The right frame of the web browser changes to the machine reboot display.
7) Click [Reboot Machine]. The machine reboots and the settings are enabled.

Step 3 Configuration on the Computer

Create job flows using Device Setup Tool to use for scanned documents.
Note
598
• Rebooting the machine may be required depending on the settings. When a message displayed on
the screen, follow the message and reboot the machine.
• Device Setup Tool is included in ApeosWare Management Suite, which you can download from our
official web site.