Fuji Xerox Versant 80 Press User Manual page 60

2 Product Overview
Finisher D4 (optional), Finisher D4 with Booklet Maker (optional), D4/D5 Folder Unit
(optional), Finisher D5 (optional)
2
No. Component
1 Tray T1 (Inserter)
2 De-curl button
3 Output tray
4 Finisher tray
5
*1
Booklet tray
6 Ground fault interrupter
7
Booklet tray button
8 Finisher right door
9
Booklet staple cartridges
10 Staple waste container
11 Staple cartridge
12 Hole punch waste container
13
Folder output tray
14
Folder output tray button
15 Finisher left door
*1 : Available when the Finisher D4 with Booklet Maker is installed
*2 : Available when the D4/D5 Folder Unit is installed
60
15 14 13 12 11
Load paper for covers or separators. Paper loaded here is not used for
copying or printing.
Press this button to decurl copies.
Outputs are delivered here.
Outputs are delivered here.
Receives copies when you select [Fold Only] or [Fold & Staple].
Automatically shuts off electricity in the event of current leakage.
*1 Press this button to deliver booklets to retrieval position.
Open this cover to clear paper jams, replace a staple cartridge, or remove
jammed staples or punch scraps.
*1 Two staple cartridges for booklet. Remove these cartridges when replacing
them with new ones, or when clearing staple jams.
Receives scraps from the stapler. Take this container out when replacing it
with a new one.
Contains staples. Take this cartridge out when replacing the cartridge with a
new one, or when clearing staple jams.
Holds punch scraps. Take this container out when removing scraps.
*2 Receives copies when you select [Z Fold] or [C Fold].
*2 Press this button to open the folder output tray.
Open this door to access the inside of the machine to clear paper jams.
1
2
10 9
8 7
Function
3 4
5
6