Print Position Adjustment - Fuji Xerox Versant 80 Press User Manual

21 Maintenance
Note
4
Select [Save].

Print Position Adjustment

Adjust the position of the image in the paper feed direction and in the vertical direction in
relation to the paper feed direction in 0.1 mm increments for both sides 1 and 2.
Adjust the position in the paper feed direction with [X Print Position], and adjust the position
in the vertical direction in relation to the paper feed direction with [Y Print Position].
1
Check the sample printout, measuring the amount of print position misalignment.
Image after
21
adjustment
2
Select [X Print Position] or [Y Print Position],
and then select the [Change Settings].
702
• The values displayed in [Side 1] and [Side 2]
vary depending on the machine. The
Alignment Adjustment Type feature adjusts
relative difference between the sides 1 and
2. Thus, if adjustable amount to the desired
direction is not enough in one side, adjust the
other side.
15 mm
15 mm
Paper feed direction
Image
before
adjustment
15 mm
X Print Position
Specify a positive value to move the position of the image in the opposite direction of the
paper feed direction, and a negative value to move the position of the image in the paper
feed direction.
Y Print Position
Specify a positive value to move the position of the image toward the rear of the
machine, and a negative value to move the position of the image toward the front of the
machine.
Back of Machine
Difference Y
15 mm
Difference X
Front of Machine