Copy Output (Specifying Finishing Options) - Fuji Xerox Versant 80 Press User Manual

4 Copy
Transparency Set & Handouts
Makes copies on transparencies. At the same time, the required number of copies is made
for handouts.
Transparency Tray
Allows you to select the paper tray to be used for the transparencies.
Select [More] to display the [Paper Supply - Transparency] screen on which you can select a
tray.
Note
Separator Tray
Allows you to select the paper tray to be used for the separators.
Select [More] to display the [Paper Supply - Separator] screen on which you can select a tray.
Note
Separator & Handout
4
Allows you to select the paper tray to be used for the separators and handouts.
Select [More] to display the [Paper Supply - Separator & Handout] screen on which you can
select a tray.
Note
Handout Tray
Allows you to select the paper tray to be used for the handouts.
Select [More] to display the [Paper Supply - Handout] screen on which you can select a tray.
Note

Copy Output (Specifying Finishing Options)

This feature allows you to select finishing options.
Note
If the Offset Catch Tray (optional) is installed, the output position of copies can be offset
alternately to separate each set of copies.
If any Finisher (optional) is installed, each set of copies can be stapled and then output.
If a punch unit is installed, the output can be punched.
198
• For [Transparency Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator Tray],
[Separator & Handout], or [Handout Tray] at the same time.
• For [Separator Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator Tray] at
the same time.
• For [Separator & Handout], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator &
Handout] at the same time.
• For [Handout Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Handout Tray] at
the same time.
• An optional component is required. For more information, contact our Customer Support Center.
• Displayed items differ depending on the attached options.