Fuji Xerox Versant 80 Press User Manual page 982

23 Appendix
USB Interface Connector of the Machine
IC Card Reader
Printed Time in Force Annotation
The time you specified to print a job, the time at which the print job is started inside the
machine, and the time at which the job is actually printed may not be coincident with one
another depending on the machine status and settings or the content of the print job. The
time printed in Force Annotation is the time at which the print job is started inside the
machine.
Stored Programming
23
982
To use the USB memory slot on the control panel, the USB Memory Kit (optional) is
required.
Insert a USB memory device directly into the USB memory slot on the control panel. If you
connect a USB memory device via a USB cable, the operation is not guaranteed.
To connect a USB memory device via a USB cable, use the USB Hub (optional).
When the USB Hub (optional) is installed, up to two devices can be connected
simultaneously even though three USB interface connectors of the machine are available
including the USB memory slot (one slot) on the control panel and USB Hub (two slots) on
the left rear side of the machine.
The IC Card Reader and USB memory cannot be connected to the machine
simultaneously. When connected simultaneously, only the first device will be recognized.
Installing the IC Card Reader (sold separately) to the machine enhances the
authentication function of the machine. Also, you can restrict the usage of the machine
and improve the security management feature and availability of documents.
The following features and operations cannot be registered on a stored program.
- Registration and call of a stored program
- EP Diagnostic Request
- System Settings
- The [Media Print - Text] and [Media Print - Photos] buttons on the Services Home
screen
- The [Store to USB] button on the Services Home screen
- The [Network Scanning], [Job Flow Sheets], and [Web Applications] buttons on the
Services Home screen
- A custom button to which the Network Scanning or Job Flow service is assigned
- Address Book for the E-mail, and Scan to PC services
- Buttons that cannot be selected
- The [Language] button on the Services Home screen
- The [Screen Brightness] button on the Services Home screen
- Dragging and Flicking operation
- The [Browse] button of the Scan to PC service
- Address editing operation of the E-mail service ([Remove], [Edit], and [Close Menu] on
the pop-up menu)
- The <Power Saver> button
After registering a program, you may not be able to retrieve the stored program correctly
if you execute the following operations:
- If a Watermark is registered on the program, and you change the default value of the
Watermark after registering the program