Emptying The Trimmer Waste Container - Fuji Xerox Versant 80 Press User Manual

21 Maintenance
2
Pull out the hole punch waste container [R4] towards you.
Finisher D4/
Finisher D4 with Booklet/
Finisher D5
3
Discard all the scraps.
21
4
Insert the empty hole punch waste container all the way into the machine.
Finisher D4/
Finisher D4 with Booklet/
Finisher D5
5
Close the door of the finisher.
Note

Emptying the Trimmer Waste Container

When the optional Squarefold Trimmer Module is installed and the optional trimmer waste
container becomes full, a message appears on the touch screen. Discard the scraps
according to the message.
If you take the trimmer waste container out of the machine, make sure to empty it
completely. If it is reinstalled with some scraps remaining, it may become full before the
message appears again, and this can cause machine breakdown.
Important • When emptying the trimmer waste container, make sure that the machine is switched on. If not
676
• A message will be displayed and the machine will not operate if the door of the finisher is not closed
properly.
switched on, the machine will not recognize that the trimmer waste container has been emptied.
Finisher C3/
Finisher C3 with Booklet Maker
Finisher C3/
Finisher C3 with Booklet Maker