Fuji Xerox Versant 80 Press User Manual page 844

22 Problem Solving
Error Code
116-389 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-390 [Cause]
[Remedy] Follow the message displayed on the touch screen and initialize the memory of the
116-391
[Cause]
116-392
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-393
116-394
116-395
116-396
116-397
116-399
116-700 [Cause]
[Remedy] Select Standard for the image quality.
116-701 [Cause]
[Remedy] Set [Image Quality] to [Standard] using the print driver.
116-702
[Cause]
22
[Remedy] Check the print data.
116-704 [Cause]
116-705
[Remedy] Use a computer to confirm the content recorded on the media.
116-706
116-707
116-708
116-709
116-710
[Cause]
[Remedy] Increase the size assigned to HP-GL/2 auto layout memory.
116-711 [Cause]
[Remedy] Match the size and orientation of the paper with the form specified, and print again.
116-713 [Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
116-714 [Cause]
[Remedy] Check the print data.
116-716
[Cause]
116-717
[Remedy] On a computer, confirm the content recorded on the media.
116-720 [Cause]
[Remedy] Stop unnecessary ports or delete unnecessary data to free up disk space.
844
Cause and Remedy
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
An error occurred in the machine.
machine.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Memory is insufficient for Image Extension Kit.
Unable to use the 2 Sided Printing feature because of insufficient memory.
A print job was processed using a substitute font.
An error occurred when reading data on the media.
The correct document size could not be judged because the receive data exceeded the
HP-GL/2 spool size.
The size and orientation of the form specified are not matched with the paper to be
printed.
The job was divided to be printed because of insufficient disk space.
An HP-GL/2 command error occurred.
An error occurred when reading the data on the media.
An error occurred during print processing because of insufficient memory.