Centreware Internet Services Setting Items - Fuji Xerox Versant 80 Press User Manual

When [POP3] is selected for [Protocol to Receive E-mail]
Configure the POP3 server.
For information on how to configure the POP3 server, refer to "POP3 Server Settings" (P.480).
For information on how to set the machine's e-mail address when you receive e-mails via POP3, refer to "Machine's E-mail
Address/Host Name" (P.477).
Note
5
Configure the server settings for sending e-mails.
Note
For information on how to configure the e-mail transmission, refer to "SMTP Server Settings" (P.480).
6
Select [Close] repeatedly until the [Tools] screen is displayed.
7
Configure the domain filtering for receiving e-mails as necessary.
For information on how to configure the domain filtering, refer to "Domain Filtering" (P.491).
8
Set up the S/MIME information.
1) Select [Connectivity & Network Setup].
2) Select [Security Settings].
3) Select [S/MIME Settings], and then set the items.
For more information on how to configure S/MIME, refer to "S/MIME Settings" (P.487).
9
Select [Close] repeatedly until the [Tools] screen is displayed.
10
Select [Close].
Note
11
Print a configuration report to confirm that the settings of each item.
For information on how to print a configuration report, refer to "Print Reports" (P.622).

CentreWare Internet Services Setting Items

You can configure the following setting items using CentreWare Internet Services:
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.557).
Machine's E-mail Address
Setup E-mail Notification
Port Settings
SMTP Server Settings
POP3 Server Settings
Receiving Protocol
Domain Filtering
S/MIME Settings
• When you enable POP over SSL in the POP3 Server Setting, receiving e-mail will be encrypted. POP
over SSL can be set using CentreWare Internet Services. For information on the setting procedure,
refer to "Configuring Machine Settings Using CentreWare Internet Services" (P.558).
• To send e-mails, SMTP server settings are required. When [POP3] is selected in [Protocol to Receive E-
mail], configure the SMTP server in [Outgoing/Incoming E-mail Settings].
• Rebooting the machine may be required depending on the settings. When a message displayed on
the screen, follow the message and reboot the machine.
connect to the internet. The communication fee shall be borne by you.
Installation Procedures
579
16